0
of 1 Selected
In Stock
Timber X 1.2m PNP
Item No.
E-flite -
EFL3875
$279.99
Need To Complete
This product may require additional items in order to work out of the box. See below for required items that may be needed to complete.
I do not need to purchase this item.
EFL3875
11.1V 2200mAh 3S 30C Smart LiPo Battery: IC3
SPMX22003S30
In Stock
$26.99
EFL3875
14.8V 2200mAh 4S 30C Smart LiPo Battery: IC3
SPMX22004S30
In Stock
$39.99
EFL3875
11.1V 2200mAh 3S 30C Smart G2 LiPo Battery: IC3
SPMX223S30
In Stock
$26.99
EFL3875
14.8V 2200mAh 4S 30C Smart G2 LiPo Battery: IC3
SPMX224S30
In Stock
$39.99
I do not need to purchase this item.
0
of 1 Selected
I do not need to purchase this item.
EFL3875
Float Set: Timber, Air Tractor
EFL5261
In Stock
$36.99
0
of 1 Selected
I do not need to purchase this item.
EFL3875
RealFlight Evolution RC Flight Simulator with InterLink DX Controller
RFL2000
In Stock
$199.99
0
of 1 Selected
I do not need to purchase this item.
EFL3875
WS2000 Wireless Simulator USB Dongle
SPMWS2000
In Stock
$34.99
0
of 1 Selected
Estimated Total:
$279.99
Selected Store
Introduction
The original Timber® captured the thrill of incredible Short Takeoff and Landing (STOL) capabilities in a design featuring sporty flight performance and ultra-friendly handling. From low-time to very experienced pilots, nearly everyone enjoys flying the Timber–but some wish it had even more aerobatic capability. The E-flite® Timber X 1.2m combines the STOL capabilities of the original model with a new wing design featuring oversized ailerons and flaps, plus an enlarged rudder and elevator and a more powerful 3S and 4S compatible power system, to also deliver 3D performance you'd expect from an all-out aerobat!
Needed to Complete
- (1) Full-range, 5+ channel transmitter and receiver
- (1) 2200–3200mAh 3–4S LiPo flight battery with EC3™ or IC3™ Connector (EFLB22003S30 or EFLB22004S30 recommended)
- Compatible LiPo Charger
What's in the Box?
- (1) E-flite Timber X 1.2m with
- (1) 50A Brushless ESC
- (1) Brushless Outrunner Motor
- (6) High-Torque, Metal-Geared Servos
- (1) Set of Optional-Use Leading Edge Slats
- (1) Product Manual
Overview
The E-flite Timber X 1.2m unleashes a new era of STOL plus 3D aerobatic capability. Based on the extremely popular Timber 1.5m model but featuring a new wing design, oversized control surfaces plus a 3S and 4S compatible power system, it offers an even wider flight envelope to deliver a truly “mild to wild” experience. Hollow-core EPO construction with composite reinforcement results in a lightweight yet strong airframe that's capable of handling extreme aerobatic maneuvers while keeping the wing loading low for impressive Short Takeoff and Landing (STOL) and slow flight performance. It's also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear of the original model so you can fly as aggressively as you want from almost any surface. You can even install the included leading edge slats for improved slow flight performance, or the optional floats (EFL5261, sold separately) so you can fly from water. Add in the LED landing, navigation and strobe lights plus many of the other popular features of the original, and the Timber X is a model almost every pilot can appreciate and enjoy!
Key Features
- Incredible Short Takeoff and Landing (STOL) plus 3D capabilities
- Enlarged and oversized control surfaces with double-beveled hinge lines
- Six durable and factory-installed high-torque, metal-geared servos
- High-power 3S and 4S compatible brushless outrunner motor and 50-amp ESC
- Shock-absorbing landing gear with oversized tundra-style wheels
- Functional and factory-installed LED landing, navigation and strobe lights
- Lightweight yet durable composite-reinforced, hollow-core EPO construction
- Optional-use leading edge slats for improved STOL and slow flight performance
- Optional EDO-style floats (EFL5261, sold separately)
Plug-N-Play® Completion Level
This Plug-N-Play (PNP) model comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly, and fly!
eXtreme Maneuverability
The Timber X 1.2m features a new wing design with a shortened span plus much larger ailerons and flaps, along with an enlarged elevator and rudder. Double-beveled hinge lines make it possible to deflect every control surface, including the flaps that can now travel in both directions, to high angles for outstanding control and eXtreme 3D aerobatic capability. Pockets in the rear of the fuselage and the included optional-use steel stabilizer joiner give you additional options to fine-tune the model's performance for even wilder 3D setups- or on low rates the controls can be as smooth and docile as they are on the original so you can fly as mild or as wild as you’d like!
eXtra Power
The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that deliver an abundance of thrust with a 3S LiPo battery, or eXtra power and vertical performance with a 4S battery without the need for any modifications or upgrades.
eXtremely Durable
Composite-reinforced, hollow-core construction with EPO material delivers a lightweight yet durable airframe. The Timber X 1.2m is also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear and oversized tundra-style wheels of the original model so you can fly aggressively from almost any surface.
STOL (Short Takeoff and Landing) Capable
The new wing design has a shorter span yet almost as much wing area as the original, plus it features drooped wingtips and can be equipped with the included optional-use leading edge slats for improved slow flight and STOL performance. These features, along with the lightweight design, oversized flaps and high-power brushless motor make it possible to spring into the air or float down to land in as little as two feet or less.
LED Lights
Like the original, the Timber X 1.2m comes with realistic-looking LED landing, navigation, and strobe lights that are factory-installed and powered from the flight battery.
Optional Floats
Owners of an original Timber 1.5m model can use the float set it came with on the Timber X 1.2m, or the EDO-style float set is available separately and includes the required mounting struts plus a dual-rudder steering system for excellent handling and easy takeoffs and landings on water.
Product Specs
Approximate Assembly Time
Completion Level
Flaps
LiPo Compatibility
Material
Motor Size
Outer Diameter
Power Type
Product Length
Propeller Size
Receiver
Skill Level
Speed Control
Wing Area
Wingspan
Video Overview
On The Fly
See The Timber X In Action!
Get Info From Communities
FAQ
Yes the Spektrum AR637T would be a great option. Via Forward Programming, it has customizable AS3X and SAFE.
Club Points Information
Horizon Hobby RC Club:
The points displayed are points you will earn based on your membership level and the cost value of the product. Be sure you are Signed In to your account to see the most accurate points you will earn on your purchase. Points are awarded and available for use once your order has shipped complete.
|
Points per $1 Spent |
Standard |
Legend |
Elite |
|
5 |
15 |
20 |
2000 points = $5 Discount
Points displayed here do not include Bonus Points for select product. If the product is marked with the Bonus Points badge you will also earn the extra "Bonus Points" points listed in the banner in addition to the calculated points displayed
