Overview
The Power 46 is designed to deliver clean and quiet power for .40 to 46-size sport and scale airplanes weighing 4 to 7 pounds (1.8–3.2 kg), 25- to 40-size 3D airplanes up to 5 pounds (2.2 kg), or models requiring up to 925 watts of power. It’s an especially good match for Hangar 9 .40-size trainers like the Alpha .40 (HAN2450), Arrow .40 (HAN2625) and warbirds like the T-34 Mentor 40 (HAN2425). Also a great match for sport planes like the Ultra Stick 40 (HAN1675 or HAN1690), Seagull Spacewalker 40 (SEA2050), and smaller sport 3D planes like the Twist 40 (HAN2650).
Needed To Complete
60A brushless ESC
4S–5S Li-Po or 12- to 16-cell Ni-MH/Ni-Cd
12x8 to 14x10 prop
| |||||||||||||||||||||||||
Flying Weight w/Battery: 5.4 lb |
Amps | Volts | Watts | Input Watts/Pound | RPM |
47.4 | 14.1 | 670 | 124 | 8220 |
Expect strong performance with very short takeoff rolls and a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management. |
Option 3: |
Motor: Power 46 |
ESC: Castle Creations Phoenix 60 (Standard settings with 12V Soft cutoff and no brake) |
Prop: APC 13x8E |
Battery: Sanyo RC-3000HV 14-Cells (7-Cell packs x2 in series) |
Flying Weight w/Battery: 6.7 lb |
Amps | Volts | Watts | Input Watts/Pound | RPM |
44.0 | 13.4 | 590 | 89 | 7950 |
Expect good performance with a good balance of thrust and top speed. Average duration is approximately 5 to 7 minutes depending on throttle management. |
Key Features
- Equivalent to 40- to 46-size glow engine for planes weighing 4–7 lb (1.8–3.2 kg)
- Ideal for 25- to 40-size 3D airplanes up to 5 lb (2.2 kg)
- Ideal for models requiring up to 925 watts of power
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- External rotor design—6mm shaft can easily be reversed for alternative motor installations
- Slotted 14-pole outrunner design
- High-quality construction with ball bearings and hardened steel shaft
- Quiet, lightweight operation
Product Specs
Adjustable Timing
No
Bushing Or Bearing
Bearing
Connector Type
3.5mm Bullet
Idle Current (Io)
3.90A @ 10V
Motor Design
Outrunner
Motor Type
Brushless
Recommended Prop Range
12x8 to 14x10
Resistance
.04 ohms
RPM/Volt (Kv)
670
Shaft Diameter
6mm (.24 in)
Voltage
14.4 to 19.2
Wire Gauge
14 AWG
Get Info From Communities
FAQ
It is a 12-pole motor.