Park 480 Brushless Outrunner Motor, 910Kv: 3.5mm Bullet
In Stock

Park 480 Brushless Outrunner Motor, 910Kv: 3.5mm Bullet

Item No.
E-flite - EFLM1500
4
$54.99
RC Club points earned on this item shown at checkout.
Product $54.99
Add Ons
Estimated Total: $54.99
Estimated Total: $54.99
The link to Park 480 Brushless Outrunner Motor, 910Kv: 3.5mm Bullet has been copied
Selected Store

Overview

The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 250 watts of power.  It’s an especially good match for E-flite's Mini Edge 3D ARF (EFL2225) and Mini Funtana 3D ARF (EFL2075), and would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF (EFL2250).  

Needed To Complete

20A–35A brushless ESC

2S–3S Li-Po or 6- to 10-cell Ni-MH/Ni-CD

10x7–12x6 propeller

Key Features

  • Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)
  • Ideal for scale park flyers 25–35 oz (710–990 g)
  • Ideal for models requiring up to 250 watts of power
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Includes mount, prop adapters and mounting hardware
  • External rotor design, 4mm shaft can easily be reversed for alternative motor installations
  • Slotted 12-pole outrunner design
  • Quiet, lightweight operation
  • High-quality construction with ball bearings and hardened steel shaft

Product Specs

Adjustable Timing
No
Bushing Or Bearing
Bearing
Connector Type
3.5mm Bullet
Idle Current (Io)
.85A @8V
Motor Design
Outrunner
Motor Type
Brushless
Outer Diameter
1.4 in (35mm)
Recommended Prop Range
10x7 to 12x6
Resistance
.08 ohms
RPM/Volt (Kv)
910
Shaft Diameter
4mm (.16 in)
Voltage
7.2 to 12
Wire Gauge
16 AWG

Compatibility

No results for your given fitment filters