In Stock

Carbon Cub S 2 1.3m BNF Basic with SAFE

Item No.
HobbyZone - HBZ32500
$269.99
RC Club points earned on this item shown at checkout.
This product may require additional items in order to work out of the box. See below for required items that may be needed to complete.
Batteries

I do not need to purchase this item.

11.1V 2200mAh 3S 30C Smart LiPo Battery: IC3
HBZ32500
11.1V 2200mAh 3S 30C Smart LiPo Battery: IC3
SPMX22003S30
In Stock
$26.99
11.1V 2200mAh 3S 30C Smart G2 LiPo Battery: IC3
HBZ32500
11.1V 2200mAh 3S 30C Smart G2 LiPo Battery: IC3
SPMX223S30
In Stock
$26.99
0 of 1 Selected
Chargers

I do not need to purchase this item.

S120 USB-C Smart Charger 1x20W
HBZ32500
S120 USB-C Smart Charger 1x20W
SPMXC1020
In Stock
$19.99
S1100 AC Smart Charger, 1x100W
HBZ32500
S1100 AC Smart Charger, 1x100W
SPMXC1080
In Stock
$99.99
S155 55W AC G2 Smart Charger
HBZ32500
S155 55W AC G2 Smart Charger
SPMXC2050
In Stock
$59.99
0 of 1 Selected
Transmitters

I do not need to purchase this item.

DXS Transmitter Only
HBZ32500
DXS Transmitter Only
SPMR1010
In Stock
$114.99
iX20 20-Channel DSMX Transmitter Only
HBZ32500
iX20 20-Channel DSMX Transmitter Only
SPMR20100
In Stock
$1,699.99
NX8+ 20-Channel DSMX Transmitter Only
HBZ32500
NX8+ 20-Channel DSMX Transmitter Only
SPMR8210
In Stock
$399.99
NX10+ 20-Channel DSMX Transmitter Only
HBZ32500
NX10+ 20-Channel DSMX Transmitter Only
SPMR10120
In Stock
$549.99
0 of 1 Selected
Flight Simulators

I do not need to purchase this item.

RealFlight Evolution RC Flight Simulator with InterLink DX Controller
HBZ32500
RealFlight Evolution RC Flight Simulator with InterLink DX Controller
RFL2000
In Stock
$199.99
0 of 1 Selected
Optional Floats

I do not need to purchase this item.

Float Set
HBZ32500
Float Set
HBZ7390
In Stock
$32.99
0 of 1 Selected
Product $269.99
Add Ons
Estimated Total: $269.99
Estimated Total: $269.99
Selected Store

Introduction

Even if you've never flown a radio controlled (RC) aircraft before, the Carbon Cub S 2 is the most versatile, capable and easiest to fly scale RC airplane yet! Based on the Carbon Cub by CubCrafters, an upgraded and thoroughly modern iteration of the classic Super Cub, and equipped with Horizon Hobby's exclusive and innovative SAFE technology, this scale reproduction makes it possible for almost anyone to learn to fly successfully. And the addition of telemetry-capable and Smart components including an ESC, battery and charger (battery and charger sold separately for the BNF® Basic version), along with the option to add SAFE Plus® GPS-enabled technology and the Landing Assist Sensor (LAS), makes learning to fly even easier than ever before!

Overview

Welcome to the exciting world of RC (Radio Controlled) flight! If you've ever dreamed of taking to the skies, Horizon Hobby has you covered. We are committed to engineering aircraft that you can learn to fly with successfully even if you've never flown RC before. Every HobbyZone® aircraft we offer features industry-leading design and technology developed by experts to keep you in control and learning at your own pace so you can turn your dreams of flight into a reality!

The HobbyZone® Carbon Cub S 2 is the easiest to fly, most capable and versatile scale trainer RC airplane yet! It's equipped with exclusive SAFE® (Sensor Assisted Flight Envelope) technology that helps to prevent overcontrol, loss of orientation and crashes so nearly everyone can learn to fly successfully. Beginner, Intermediate and Experienced modes allow you to choose the level of stability and control you need, or are ready to try, at the flip of a switch. And you can instantly return to steady flight using Panic Recovery with the push of a button in any flight mode. Oversized tires make it possible to take off and land on a variety of surfaces including thick grass, gravel paths, dirt trails and smooth pavement, or you can install the optional floats to fly from water—which adds to its unmatched versatility and capabilities.

The Carbon Cub S 2 is equipped with a 30-amp telemetry-capable ESC that provides a variety of real-time power system related telemetry data including motor RPM, current, battery voltage and more to compatible Spektrum AirWare equipped transmitters, and even approximate flight battery power remaining via multiple LEDs on the DXS transmitter included with the RTF version. The addition of exclusive Spektrum Smart components including a lithium polymer (LiPo) battery and charger make it more convenient to charge properly and safely (battery and charger sold separately for the BNF® Basic version). And you have the option to easily upgrade to SAFE Plus GPS-enabled technology that offers features such as AutoLand and Virtual Fence, along with the option to install the Landing Assist Sensor (LAS) that automatically "flares" for smoother landings, to make learning to fly—and to land safely—easier than ever!

The Ready-To-Fly (RTF) version includes everything needed to fly in one box, and is the perfect choice if you're a new RC pilot. From the Spektrum DXS 2.4GHz transmitter you can use with other Bind-N-Fly® (BNF) and BNF Basic aircraft after you learn to fly the Carbon Cub S 2, to the 3S 2200mAh Smart LiPo battery that delivers long flight times and the convenient S120 USB-C Smart charger that can be used with a variety of USB power sources, there's nothing extra you need to buy or provide! A BNF Basic version is also available for experienced pilots who want to use their favorite Spektrum transmitter along with batteries and chargers they may already own. And for both versions, the powerful and efficient brushless power system including a telemetry-capable ESC, plus the flight controller, receiver and servos, are all factory-installed in the durable EPO airframe that assembles quickly and easily without the need for glue or special tools.

Features

  • The most capable, versatile and easiest to fly scale trainer based on the iconic Carbon Cub from CubCrafters
  • Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly
  • Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch
  • Panic Recovery mode at the push of a button to prevent loss of control and crashes
  • Easily upgrade to SAFE Plus GPS-enabled technology to add AutoLand, Virtual Fence and Holding Pattern features
  • Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings
  • Factory-installed servos, Spektrum flight controller and serial receiver
  • Powerful and efficient brushless power system including a 30A telemetry-capable ESC
  • Capable of aerobatic maneuvers including loops, rolls and upside down (inverted) flight
  • Robust landing gear with oversized tires for operation from a variety of surfaces
  • Quick and easy assembly—no glue or special tools required
  • Durable EPO construction that's tough yet lightweight
  • Optional floats available for flying from water
  • Full line of replacement/spare parts available
  • Practice flying this aircraft in the RealFlight® RC flight simulator
Bind-N-Fly Completion Level Advantage
Bind-N-Fly Completion Level Advantage

Already own a Spektrum transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly!

 

Telemetry Capable
Telemetry Capable

The Carbon Cub S 2 is equipped with an ESC that can provide a variety of real-time power system related telemetry data including motor RPM, current, battery voltage and more to compatible Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/G3 and 8 G2, the DX9, iX12, iX20 and others) while you fly.

 

Durable Design
Durable Design

Construction with advanced EPO material delivers a lightweight yet durable airframe that's tough enough to handle everyday flying punishment without getting bent out of shape. And in the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement parts is readily available.

 

Easy Assembly
Easy Assembly

The Carbon Cub S 2 arrives mostly factory-assembled with the power system, servos plus the flight controller and receiver installed. All you need to do is finish some quick and easy final assembly, without the use of glue or special tools, and you'll be ready to fly in less time than it takes to charge a battery!

 

Versatile Gear Options
Versatile Gear Options

Thick grass, gravel paths, dirt trails; you can fly from these and many other surfaces that are impossible for most models of this size to handle. The robust landing gear is equipped with oversized tires that soak up the bumps of rough surfaces and provide excellent prop clearance. The optional float set (sold separately) takes just a few minutes to install and all the necessary hardware is included with the aircraft and float set so you can fly from lakes and ponds.

 

Optional Flaps
Optional Flaps

Functional flaps are an option for improved slow speed handling and even shorter takeoffs and landings. This feature requires a 7+ channel computer transmitter plus a flap servo and a servo extension (sold separately).

 

 
Optional Landing Assist Sensor for Smoother Landings
Optional Landing Assist Sensor for Smoother Landings

The Spektrum Landing Assist Sensor (LAS) is easy to install and provides automatic "flare" control to help inexperienced pilots "grease" landings by minimizing or completely eliminating bouncing (works over many/most surfaces and provides optimum performance when flying over/landing in grass).

 
Learn to Fly Successfully with SAFE Technology
Learn to Fly Successfully with SAFE® Technology

If this is your first RC airplane, Horizon Hobby-exclusive SAFE (Sensor Assisted Flight Envelope) technology prevents over-control and crashing while also offering multiple flight modes to deliver more control and capabilities as your skills progress:

 

Panic Recovery
Panic Recovery

If you ever lose control of the airplane in the more advanced control modes simply switch to Beginner Mode and release the control sticks. SAFE® Plus technology will automatically return the airplane to level flight.

 

Beginner Mode
Beginner Mode

Pitch and bank angle limits prevent over-control that can result in a loss of orientation and crashes. When the control sticks are released the airplane returns to level flight on its own. Best of all takeoffs are as simple as giving full throttle and letting the airplane fly off the ground or by giving it a quick hand launch.

 

Intermediate Mode
Intermediate Mode

More freedom in pitch and bank, but still prevents over-control and does not return to level flight on its own. This mode allows you to make tighter turns and to climb and descend faster as your skills advance. Beginner mode automatically activates and returns the airplane to level flight when the airplane descends below approximately 30 feet above ground level and the sticks are released.

 

Experienced Mode
Experienced Mode

No pitch or bank angle limits so you have complete control! You can even fly inverted (upside down) and perform aerobatic maneuvers including loops, rolls, stall turns and more. Panic Recovery Mode can be activated by switching to Beginner Mode and releasing the sticks.

 

Easily Upgrade to SAFE® Plus GPS-Enabled Technology
Easily Upgrade to SAFE® Plus GPS-Enabled Technology

With quick and easy installation of the optional Spektrum GPS Module you can add next-level autonomous guidance features that make it even easier to learn to fly. With SAFE Plus added you get:

 

AutoLand
AutoLand

Activated by simply holding down a button, the advanced AutoLand function puts the airplane on a stabilized approach to land on its own near the GPS initialization point. You can even provide some directional guidance to avoid obstacles or to adjust the approach while letting the system do the rest to execute a safe landing. As your skills progress and you gain more confidence you can take over more of the control inputs, eventually learning to land without any assistance from the automated system at all.

 

Holding Pattern
Holding Pattern

This very helpful SAFE Plus-exclusive feature essentially allows you to "pause" the flight by putting the airplane into a GPS-guided holding pattern. When activated with the quick press of a button, the airplane will automatically return to a position above the GPS initialization point and circle until the command is cancelled with another quick press of the button. It's a great way to safely hand the controls off to a friend or to regain visual contact if you ever lose sight of the model.

 

Virtual Fence
Virtual Fence

It's easy to accidentally let an RC airplane fly too far away, but with Virtual Fence, worry no more. It creates an invisible boundary the airplane won't fly past. When the airplane reaches this boundary, it will automatically turn around and fly back toward the GPS initialization point. Then it will "wag" the wings to let you know when you have control again.

 

Product Specs

Approximate Assembly Time
Less than an hour
Approximate Flight Time
5 - 7 minutes
Band
2.4GHz
Battery
Sold Separately
CG (Center of Gravity)
2.4 - 2.7" (62 - 68mm) back from the leading edge of the wing measured at th fuselage
Charger
Sold Separately
Completion Level
Bind-N-Fly Basic
Flaps
No
LiPo Compatibility
3S
Material
EPO
Minimum Required Radio
4-channel
Minimum Speed Control
30A
Motor Size
480, 960Kv
Power Type
Electric
Product Length
34" (864 mm)
Propeller Size
9x6"
Radio
Sold Separately
Receiver
Included
Recommended Motor Battery
3S 2200mAh LiPo
Servos
Included
Skill Level
Level 1
Speed Control
Included
Spinner Size
1.6" (41 mm)
Transmitter Range
Full
Trim Scheme Colors
Yellow and gray
Wingspan
51" (1295 mm)

Compatibility

No results for your given fitment filters

Video Overview

FAQ

Start here to register yourself as a recreational SUAS operator. You do not need to register each airplane individually. https://www.faa.gov/uas/recreational_flyers This model does not broadcast Remote ID information, it is not required to be sold/provided with this capability. After September 2023, if flying at a non-FRIA, a remote ID module would be required.

Yes, they are part of the landing gear set: https://www.horizonhobby.com/product/landing-gear-set-carbon-cub-s-1.3m/HBZ3223.html

The Carbon Cub S2 1.3M BNF Basic requires a Spektrum DSM2/DSMX transmitter. In order to fly with your listed transmitter you'd need to replace the receiver/flight-controller and would lose the SAFE/AS3X functionality of the plane along with their additional built-in features

Using an 11.1v 2200mAh battery should yield a flight time of five to seven minuets or more, depending on throttle management.

Yes, it is completely compatible with NX (and DX) transmitters.

Product Details

icon-box
In The Box
  • (1) HobbyZone Carbon Cub S 2 Plane
  • (1) Brushless Outrunner Motor (installed)
  • (1) 30A Brushless ESC (installed)
  • (4) Servos (installed)
  • (1) Spektrum Flight Controller (installed)
  • (1) Spektrum 4650 Serial Receiver (installed)
  • (1) Product Manual
icon-how-to
Needed to Complete
  • (1) Full-range 6+ Channel Spektrum™ DSMX®/DSM2® Compatible 2.4GHz Transmitter
  • (1) 3S 11.1V 2200mAh LiPo Battery with EC3™ or IC3™ Connector
  • (1) Compatible LiPo Charger
Carbon Cub S 2 1.3m BNF Basic with SAFE