Clearance Sale!

40-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3

Item No.
E-flite - EFLA1040B
$34.79 Price reduced from $86.99 to
Clearance Sale!
RC Club points earned on this item shown at checkout.
Product $34.79
Add Ons
Estimated Total: $34.79
Estimated Total: $34.79
Selected Store

Overview

E-flite® 40-Amp Pro Switch-Mode BEC Brushless ESC (V2) is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Key Features

  • Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
  • 5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-sized servos with the BEC
  • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  • Finned heat sinks
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 70% of battery starting voltage
  • Programmable throttle input range
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges to use with a large variety of brushless motors
  • Utilizes new smaller Mosfet technology to minimize weight
  • Radio System Power ON /OFF Switch
  • Prewired connectors—E-flite EC3â„¢ connector on battery input and 3.5mm gold bullet connectors on motor output leads

Product Specs

Amperage
40A
Brakes
Yes - Programmable
Connector Type
EC3
Input Voltage
10.8V - 22.2V
Output Connector
3.5mm Bullet
Part Type
Electronics
Programmable
Yes
Wire Gauge
13 AWG

Compatibility

No results for your given fitment filters