40-Amp Lite Pro Switch-Mode BEC Brushless ESC V2: EC3
In Stock

40-Amp Lite Pro Switch-Mode BEC Brushless ESC V2: EC3

Item No.
E-flite - EFLA1040LB
4
$80.99
RC Club points earned on this item shown at checkout.
Product $80.99
Add Ons
Estimated Total: $80.99
Estimated Total: $80.99
The link to 40-Amp Lite Pro Switch-Mode BEC Brushless ESC V2: EC3 has been copied
Selected Store

Overview

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Key Features

  • Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
  • 5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
  • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges, use with a large variety of brushless motors

Product Specs

Amperage
40A
BEC Voltage
2.5A continuous
Brakes
Yes
Connector Type
EC3
Input Voltage
10.8?22.2V
Output Connector
3.5mm Bullet
Part Type
Electronics
Programmable
Yes

Compatibility

No results for your given fitment filters