30-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3
Next Shipment March 2025

30-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3

Item No.
E-flite - EFLA1030B
4.4
$51.99
RC Club points earned on this item shown at checkout.
Product $51.99
Add Ons
Estimated Total: $51.99
Estimated Total: $51.99
The link to 30-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3 has been copied
Selected Store

Overview

The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Key Features

  • Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
  • 3.5A continuous current, 5V Switch-Mode BEC Circuit
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-size servos with the BEC
  • 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing - 5 user-selectable ranges for use with a large variety of brushless motors
  • Pre-wired connectors—E-flite EC3â„¢ connector on battery input and 3.5mm gold bullet connectors on motor output leads

Product Specs

BEC Voltage
3.5A continuous
Brakes
Yes
Connector Type
EC3
Input Voltage
10.8?14.8V
Maximum Burst Current
35A
Maximum Continuous Current
30A
Output Connector
3.5mm Bullet
Part Type
Electronics
Programmable
Yes

Compatibility

No results for your given fitment filters
Instruction Manual
30-Amp Pro ESC Manual
Optional Parts

Get Info From Communities

RC 101
Buying Guides
Troubleshooting
Downloads
How-To's

FAQ

3-4S LiPo refers to the cell count and chemistry of the battery. You don't say the size of the plane, or battery capacity you require, but 3S and 4S 2200mAh packs are common. Two examples would be SPMX22003S30 and SPMX22004S30. NiMH is a different chemistry, and less common. he cell voltage is lower, which is why 9-12 cells are needed rather than 3-4.