In Stock

AR410 DSMX 4-Channel Sport Receiver

Item No.
Spektrum - SPMAR410
$34.99
RC Club points earned on this item shown at checkout.
Product $34.99
Add Ons
Estimated Total: $34.99
Estimated Total: $34.99
Selected Store

Overview

The Spektrum AR410 air receiver is a full-range, 4-channel sport receiver with DSMX/DSM2 compatibility and a compact footprint that’s streamlined to fit in a wide range of models. More than just a simple box that connects your servos, the AR410 features an internal antenna design that delivers a whole new world of installation ease that includes a higher-level of durability and convenience while maintaining superior full-range performance for your electric or engine powered aircraft.

In addition, the AR410 has been integrated with fly-by range telemetry that includes flight log and receiver battery pack voltage data. Access to telemetry is automatic when used with telemetry-capable Spektrum transmitters.* There’s nothing to do in order to enjoy the peace-of-mind instantly knowing receiver battery voltage offers.

No more bind plugs! Instead, a large bind button is used to enter the bind mode. All combined Spektrum gives you more in a basic receiver, like the AR410, so that you can fly with the highest sense of confidence possible and have more fun.

*Not compatible with the TM1000 and TM1100 external telemetry modules

Key Features

  • Compact low-cost, full-range DSMX receiver with telemetry
  • Antenna-less design increases convenience, performance and durability
  • Integrated flight log and receiver voltage telemetry with fly-by range
  • Streamlined, end-pin design in a lightweight hard-case
  • Large bind-button eliminates the need for the old bind plug
  • Lightweight park flyer-size with full-range performance
  • Ideal for most aircraft including indoor sport models
  • Capable of low latency 11ms and standard 22ms Frame Rates.
Antenna-less

Unlike old technology that requires an external antenna to achieve adequate reception, the new AR410 features an internal antenna design that offers superior full-range performance. In addition, installation is easier than ever, plus there’s no longer a risk of failure due to long-term wire exposure or abuse.

Antenna-less
Bind, Redefined

New technology eliminates the need for the old bind plug. With the AR410, a large top-located button makes binding more convenient than ever while two bind-sequence options make the process simpler by allowing you to bind while powering up or after receiver power is connected.

Bind, Redefined
Telemetry

Built into the AR410 is telemetry that automatically delivers vital data to your Spektrum telemetry-capable transmitter. With fly-by range, you can retrieve flight log data such as any fades, frame losses or holds and see receiver voltage status in real-time.

Telemetry
Smart Technology Ready

The AR410 now comes updated and ready to provide the advantages of state-of-the-art connectivity right out of the box by supporting the innovative, all-in-one telemetry of Spektrumâ„¢ Smart batteries and ESCs. Smart Technology ensures that all of your vehicle's electronics work together seamlessly for the greatest efficiency and performance. It keeps you aware of every component's status, boosts your confidence in its capabilities, and makes your entire system more responsive and simple to use

Smart Technology Ready

Product Specs

Antenna Length
Internal
Application
Air
Band
2.4GHz
Bind Method
Bind Button
Channels
4
Data Port
No
Failsafe
Yes
Flight Log Compatible
No
Forward Programming
No
Input Voltage
3.5-9V
Integrated Variometer
No
Modulation
DSMX
Product Application
Air
Product Height
0.55 in (13.9mm)
Product Length
1.78 in (45.2mm)
Product Weight
0.25 oz (7 g)
Product Width
0.79 in (20.0mm)
Programmable
No
Range
Full
Remote Receiver Ports
0
Resolution
2048
Rev Limiter
No
Serial Out
None
Technology
Standard
Telemetry
Integrated
Telemetry Range
Fly-By
Water-Resistant
No

Compatibility

No results for your given fitment filters

Video Overview

FAQ

Spektrum receivers alone are not Remote ID compliant, because there are many applications for the receivers, and many instances where RID is not required. If using this receiver in an aircraft where RID is required, a separate module or some other form of compliance would be needed.

Many batteries are suitable, BEC power from an ESC can also be used. The AR410 accepts input voltage in the range of 3.5 - 9.0VDC.

The signal wire goes to the top (label). The orientation is molded onto the receiver, next to the battery port.

9V may be more than your servos can handle. We recommend a more conventional LiFe or LiPo receiver battery.

The AR410 does not offer AS3X. The AR630 does have AS3X.