Discontinued | This Item is No Longer Available

1/8 8IGHT-T 4WD Truggy Nitro RTR, Purple/Yellow

Item No.
Losi - LOS04011
Selected Store
1/8 8IGHT-T 4X4 Nitro Truggy RTR, Purple/Yellow
1/8 8IGHT-T 4X4 Nitro Truggy RTR, Purple/Yellow
LOS04011V2
View Alternate Product Details
Needed to Complete
  • 20-30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter
What's in the box?
  • (1) 8IGHT-T 4WD Nitro Truggy RTR
  • (1) DX2E Transmitter
  • (4) AA Batteries
  • (1) Dynamite 1600mAh 6V NiMH receiver pack
  • (1) 4-Way Cross Wrench
  • (1) Bind Plug
  • (1) User Manual

Overview

If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.

Heavy-Duty Steering and Gen III Radio Tray

The vehicle comes equipped with a Spektrumâ„¢ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

Brute Power

A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Key Features

  • Your fast track to nitro truggy racing
  • 4mm T-6 aluminum chassis plate
  • Spektrumâ„¢ ultra-torque waterproof metal-gear steering servo
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed differentials
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrumâ„¢ waterproof metal-gear servo
  • Includes Spektrum DX2E DSMR® transmitter
  • Includes Dynamite 1600mAh 6V NiMH receiver pack

Product Specs

Approximate Assembly Time
No assembly required
Ball Bearings
Full Precision Ball Bearings
Body
Painted/Screened
Brakes
Dual Disc
Chassis
4mm Plate, Aluminum
Completion Level
Ready-To-Run
Differential
Fluid Gear Diff
Drivetrain
4WD
Final Drive Ratio
15.03:1
Fuel Tank Capacity
125cc (4.2 Oz)
Gear Pitch
1.0 Module
Internal Gear Ratio
3.91:1
Pinion
13T
Power Type
Nitro
Product Height
7.30 in (185.5mm)
Product Length
18.75 in (476mm)
Product Width
16.38 in (416.1mm)
Radio
Included
Receiver
Included
Scale
1/8
Servos
Included
Shock Type
15mm bore, Composite
Spur Gear
50T
Suspension
4-wheel Independent
Tire Tread
XTT
Vehicle Type
Truggy
Wheel Type
Racing Dish
Wheelbase
14.93-15.09 in (379-383mm)