Park 300 Brushless Outrunner Motor, 1380Kv: 2mm Bullet
Next Shipment January 2025

Park 300 Brushless Outrunner Motor, 1380Kv: 2mm Bullet

Item No.
E-flite - EFLM1150
4
$43.99
icon-notification Important Bulletin
RC Club points earned on this item shown at checkout.
Product $43.99
Add Ons
Estimated Total: $43.99
Estimated Total: $43.99
The link to Park 300 Brushless Outrunner Motor, 1380Kv: 2mm Bullet has been copied
Selected Store

Overview

Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g), or models requiring up to 85 watts of power.

Needed To Complete

8A–10A Brushless ESC

6–8 Ni-Cd/Ni-MH or 2–3S Li-Po

6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer

Key Features

  • Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Ideal for models requiring up to 85 watts of power
  • Integrated prop saver design
  • Mount, prop adapter and hardware included
  • External rotor design with 3.2mm shaft
  • Low noise level

Product Specs

Adjustable Timing
No
Bushing Or Bearing
Bearing
Connector Type
2mm Bullet
Idle Current (Io)
.40A @ 8V
Motor Design
Outrunner
Motor Type
Brushless
Outer Diameter
1.1 in (28mm)
Recommended Prop Range
6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
Resistance
.33 ohms
RPM/Volt (Kv)
1380
Shaft Diameter
3.17mm (1/8 in)
Voltage
7.2–11.1V

Compatibility

No results for your given fitment filters