Servoless Payload Release
Servoless Payload Release
Servoless Payload Release
Next Shipment Date Unknown

Servoless Payload Release

Item No.
E-flite - EFLA405
4.7
$28.99
RC Club points earned on this item shown at checkout.
Product $28.99
Add Ons
Estimated Total: $28.99
Estimated Total: $28.99
The link to Servoless Payload Release has been copied
Selected Store

Overview

The E-flite® servoless payload release enables you to drop a single payload while in flight, or enables you to use multiple devices to drop multiple payloads using only one channel on your receiver. It can also be used as a tow release for sailplanes.

Key Features

  • Plugs directly into the receiver using standard servo connectors
  • Connect and control multiple mechanisms with a single radio channel
  • One-by-one and programmed delay modes
  • Electronic and manual release mechanisms
  • Ready to use and easy to install

Product Specs

Current Draw Idle
6mA
Current Draw Stall
350mA
Input Voltage
4.8 - 8.5V
Part Type
Electronics

Compatibility

No results for your given fitment filters
Replacement Parts

Get Info From Communities

RC 101
Buying Guides
Troubleshooting
Downloads
How-To's

FAQ

You can still daisy chain both modules and get them to drop simultaneously by setting their delay to 'zero delay.' Here's some more info from the manual on setting this up: If using multiple devices, daisy chaining will be required. The device offers five different release modes for multiple payloads: Zero Delay Blue LED (Default) 250ms Delay Green LED 500ms Delay Red LED 750ms Delay Flashing Red LED Individual Release White LED To change between modes, simply press the mode button on the side of the Servoless Payload Release until the LED displays the desired mode color. Each device in a chain may utilize a different release mode for maximum flexibility. The order of command starts with the device connected directly to the receiver, then follows the chain.