In Stock

Fabric Covering, 5m Roll, White

Item No.
Oratex - ORA10010005
$74.99
RC Club points earned on this item shown at checkout.
Product $74.99
Add Ons
Estimated Total: $74.99
Estimated Total: $74.99
Selected Store

ORATEX® fabric covering features

  • Easy application: due to its pliability and shrinkage of 15 % in both directions, it is easy to apply around corners and edges. Creases can easily be removed with a heat gun.
  • Excellent adhesion: the adhesive is approximately twice as strong as that of conventional film coverings.
  • Remarkable toughness and stability of the fabric.
  • A protective seal: the surface has been treated to make it resistant to fuel and oil. It can also be painted if desired.
  • A range of colors to suit most applications.

Compatibility

No results for your given fitment filters

FAQ

The width is 60cm (23.6 inches).

Oratex is manufactured in Germany. ORATEX®, an iron-on type polyester fabric covering, is ideal for all scale models, large scale models and historical models. ORATEX® has 5 points in its favour: 1. Easy application: due to its pliability and a shrinkage of 5 % in both directions ORATEX® is easy to apply round corners and edges. Creases can easily be removed with a heat-gun. 2. Excellent adhesion: the adhesive of ORATEX® is about twice as strong as that of conventional fabric coverings. 3. Remarkable toughness and stability of the fabric. 4. Protective seal: the surface of ORATEX® has been treated to make it resistant to fuel and oil. You can paint or varnish it if you wish, but there is no need for it! 5. 8 attractive colours.

Yes, Oratex covering accepts paint very well.

Yes, Oratex is an iron-on material that has a pre-applied heat-sensitive adhesive. It applies in the same manner as polyester films such as UltraCote and MonoKote. Natural white has a very slight cream or off-white hue.
ORATEX® is an iron-on polyester fabric covering, ideal for large-scale rc models.