D645MW Standard Digital High Torque Metal Gear Servo
D645MW Standard Digital High Torque Metal Gear Servo
D645MW Standard Digital High Torque Metal Gear Servo
In Stock

D645MW Standard Digital High Torque Metal Gear Servo

Item No.
Hitec RCD Inc. - HRC36645
4.9
$43.99
RC Club points earned on this item shown at checkout.
Product $43.99
Add Ons
Estimated Total: $43.99
Estimated Total: $43.99
The link to D645MW Standard Digital High Torque Metal Gear Servo has been copied
Selected Store
  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • 1M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline

Product Specs

Application
12-15lb Sport, 3D performance & scale airplanes, 2M & up sailplanes, 600mm electric helis, 50-59 class gas helis, 1:10 scale on/off-road vehicles, 1M & scale sail boats, 1/10 scale power boats
Bearing
Dual Ball Bearing
Bushing Or Bearing
Bearing
Connector Type
Universal
Current Draw Idle
30mA
Current Draw Stall
2,650mA
Deadband
2µs
Gear Type
Metal
Input Voltage
4.8V ~ 6.0V ~ 7.4V
Maximum Servo Speed
0.28 sec/60 deg @ 4.8V, 0.20 sec/60 deg @ 6.0V, 0.17 sec/60 deg @ 7.4V
Maximum Servo Torque
115oz/in @ 4.8V, 158oz/in @ 6.0V, 180oz/in @ 7.4V
Product Height
1.48" (38 mm)
Product Length
1.59" (40 mm)
Product Weight
2.11 oz (57.0g)
Product Width
0.77" (20 mm)
Programmable
Yes
Servo Operating Voltage
4.8 - 7.4V (HV)
Servo Size Category
Standard
Servo Type
Digital
Spline Count
25 Teeth
Water-Resistant
No
Wire Gauge
22 AWG

Compatibility

No results for your given fitment filters

Highlights of the D-Series Servos

The metal D-645MW is part of Hitec's D-Series servo line. All Hitec D-Series servos have been designed using Hitec's brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

Product Details

icon-box
In The Box
  • (1) D645MW Standard Digital High Torque Metal Gear Servo
D645MW Standard Digital High Torque Metal Gear Servo