Discontinued | This Item is No Longer Available

1/8 Inferno Neo3.0 VE 4X4 Off-Road 4S Brushless Buggy RTR, Green

Item No.
Kyosho - KYO34108T1
Selected Store

Introduction

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor and ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE allows anyone to test the bounds of common sense with powerful brushless motor acceleration.

  • Pre-Assembled Chassis And Body
  • Full-Time 4WD With Low CG
  • Big Bore Oil Shocks
  • Full Bearing Specifications
  • Wide Variety Of Optional Parts

Features

  • Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
  • Full-time 4WD with low C of G 3-diff shaft drive.
  • Big Bore oil shocks and 4-wheel independent double wishbone suspension.
  • Full bearing specifications with 18 ball bearings on drive system and suspension.
  • Features thick suspension arms with high torsional rigidity.
  • Wide variety of optional parts is available to upgrade the chassis.
  • Equipped with 1.0 module metal main gear, designed for hard running.
  • Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
  • Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.
Anodized Finish Aluminum
Anodized Finish Aluminum

Shares the same stylish gun metallic anodized finish aluminum parts as Kyosho’s flagship “Inferno MP9”.

 

TORX8 Brushless Motor
TORX8 Brushless Motor

KYOSHO SPEED HOUSE TORX8 brushless motor delivers powerful acceleration. 2-piece motor mount allows easy backlash adjustment and removal of motor.

 

BRAINZ8 ESC
BRAINZ8 ESC

KYOSHO SPEED HOUSE BRAINZ8 ESC with electric cooling fan features a 10-item program that allows precision adjustments such as brake, timing advance, cutoff voltage and heat protection.

 

Large Big Bore Shocks
Large Big Bore Shocks

Large Big Bore resin oil shocks produce excellent surface tracing. High-strength aluminum shock stays deliver full shock absorber performance.

 

Adjustable Alignment
Adjustable Alignment

Turnbuckle upper arms and steering tie rod can be adjusted to optimize alignment setting to running conditions.

 

KS5031-09MW Steering Servo
KS5031-09MW Steering Servo

Included high-torque (KS5031-09MW) steering servo delivers nimble control feel. Features built-in high durability metal gears.

 

Lowered Chassis Height
Lowered Chassis Height

Lowered chassis height in combination with optimal weight balance and big bore shocks realizes high stability running performance.

 

KC Cross Tires
KC Cross Tires

Equipped with KC Cross Tires that are designed with a block pattern seen in motocross bikes. Wear-resistant, these tires deliver exceptional performance on any surface.

 

Printed Body
Printed Body

High visibility printed body is designed for airborne stability and control and is also pre-cut with decals applied.

 

Product Specs

Approximate Assembly Time
No assembly required
Ball Bearings
Full set, 18 total
Battery
Two 7.2V NiMH, or two 7.4V LiPo with T-plug connector
Body
Trimmed and painted with green color scheme, rear wing included
Brakes
Integral wirth ESC
Bushing Material
Metal
Charger
Sold Separately
Chassis
Aluminum
Completion Level
Ready-To-Run
Connector Type
Deans
Differential
Machined bevel gears
Drivetrain
4WD
Gear Pitch
1.0 Module
Internal Gear Ratio
12.7:1
Max Battery Dimensions
3.3 x 1.4 x 0.71" (85 x 35 x 18mm)
Motor Size
2000Kv
Motor Type
Brushless
Outer Diameter
4.5" (115mm)
Power Type
Electric
Product Height
7.4 in (189mm)
Product Length
19.5 in (496mm)
Product Weight
7.8lbs (3,550g) approximate
Product Width
12.1 in (307mm)
Radio
Synchro KT-231P+
Receiver
Included
Scale
1/8
Servos
High-speed, high-torque steering servo
Shock Type
Big bore oil-filled resin body
Suspension
4-wheel Independent
Tire Tread
Block Pattern
Vehicle Type
Buggy
Water-Resistant
Yes
Wheel Type
10-spoke plastic 1:8 scale buggy
Wheelbase
12.7 - 12.9 in (323 - 328mm)

Compatibility

No results for your given fitment filters

Video Overview

Power and acceleration tests the bounds of common sense in a buggy that also features nimble control!

Product Details

icon-box
In The Box
  • (1) 1/8 Inferno Neo3.0 VE 4WD Buggy RTR
  • (1) 2.4GHz Syncro KT-231P+ Transmitter
  • (4) L Shaped Hex Wrenches (1.5mm, 2.0mm, 2.5mm, 3.0mm)
  • (1) Cross Wrench
  • (1) 17mm Wheel Wrench
icon-how-to
Needed to Complete
  • (4) AA Batteries for Transmitter
  • (2) 7.4V Batteries
  • (1) Battery Charger
1/8 Inferno Neo3.0 VE 4X4 Off-Road 4S Brushless Buggy RTR, Green