Discontinued | This Item is No Longer Available

1/8 8IGHT 4WD Buggy Nitro RTR, Red/Yellow

Item No.
Losi - LOS04010
Selected Store
1/8 8IGHT 4X4 Nitro Buggy RTR, Red/Yellow
1/8 8IGHT 4X4 Nitro Buggy RTR, Red/Yellow
LOS04010V2
View Alternate Product Details
Needed to Complete
  • 20-30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter
What's in the box?
  • (1) 8IGHT 4WD Nitro Buggy RTR
  • (1) DX2E Transmitter
  • (4) AA Batteries
  • (1) Dynamite 1600mAh 6V NiMH receiver pack
  • (1) 4-Way Cross Wrench
  • (1) Bind Plug
  • (1) User Manual

Overview

If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT option parts currently available.

Race-Proven Durability

In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.

Brute Power

A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Key Features

  • Your fast track to nitro buggy racing
  • 4mm T-6 aluminum chassis plate
  • Gen III radio tray for longer servo life
  • Dynamite® .21 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed differentials
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrumâ„¢ waterproof metal-gear servos
  • Includes Spektrum DX2E DSMR® transmitter
  • Includes Dynamite 1600mAh 6V NiMH receiver pack

Product Specs

Approximate Assembly Time
No assembly required
Ball Bearings
Yes
Battery
Included
Body
8IGHT Cab -Forward, Screened
Brakes
Composite Disc with Steal Pads
Bushing Material
Metal
Charger
Sold Separately
Chassis
4mm, 6061 T-6 Aluminum
Completion Level
Ready-To-Run
Differential
Sealed viscous filled gear differential
Drivetrain
4WD
Final Drive Ratio
11.5:1
Fuel Tank Capacity
125cc (4.2 Oz)
Gear Pitch
1.0 Module
Ground Clearance
2.4 in (60mm)
Internal Gear Ratio
3.92:1
Outer Diameter
4.4 in (111mm)
Pinion
17T
Power Type
Nitro
Product Height
7.1 in (180mm)
Product Length
19.6 in (497mm)
Product Weight
7.8 lb (3.5kg)
Product Width
12.1 in (308mm)
Radio
Included
Rear Track
12.1 in (307mm)
Receiver
Included
Scale
1/8
Servos
Included
Shock Type
16mm Big Bore Aluminum Oil Filled
Speed Control
Included
Spur Gear
50T
Suspension
Independent
Tire Compound
Medium
Tire Tread
XBT
Vehicle Type
Buggy
Wheel Type
Dish
Wheel Width
1.7 in (42mm)
Wheelbase
12.7 -12.9 in (323-327mm)

Compatibility

No results for your given fitment filters