1/19
Pre-Order | Releasing March 31, 2025

1/10 Toyota Sprinter Trueno AE86 Fazer D2 2WD Drift Car RTR

2WD
Brushed
Item No.
Kyosho - KYO34501T1
Write a Review
$239.99
RC Club points earned on this item shown at checkout.
Product $239.99
Add Ons
Estimated Total: $239.99
Estimated Total: $239.99
The link to 1/10 Toyota Sprinter Trueno AE86 Fazer D2 2WD Drift Car RTR has been copied
Selected Store

Toyota SPRINTER TRUENO Overview

The FAZER series Ready-To-Run is primed for action straight out of the box, simply load a charged battery on the car and insert batteries into the transmitter. Now the long-awaited RWD drift-spec FAZER D2 model has arrived! Rear two-wheel drive (RWD) is the standard configuration for current 1/10 scale drifting RC cars and slides over the road surface under heavy counter-steer, just like a true drifting machine. With its drift-spec RWD chassis, the FAZER D2 features different weight distribution and suspension design to the standard FAZER as well as a receiver with built-in gyro unit that automatically controls counter-steer for optimal body slide. The gyro controls both steering and throttle, allowing newcomers to drifting to drift drive like a pro. The chassis also incorporates other modern RC drift car components such as long-span suspension arms and a high-mounted motor for easy handling and setup. Even though this FAZER is packaged as a RTR, you can still change and upgrade parts for custom tuning and setting of the D2 like a pure RC car. To complete the full drift machine experience, this model includes Kyosho’s ultra-scale body and a variable wheelbase that allows a variety of body styles to be mounted. Traditionally, 1/10 scale drift cars have been the domain of experienced drivers but the complete FAZER D2 Readyset package brings the thrill of drifting machines within easy reach.

  • Fully Assembled 1/10 Scale Electric Drift Car
  • Newly Designed RWD Drift Chassis
  • Plastic Drift Tires Are Included As Standard
  • Wide Range Of Optional Parts Are Available
  • Body Is Painted With Decals Applied

Features

  • Fully assembled 1/10 scale electric powered drift car in a RTR package. All you need is 4 x AA batteries for the transmitter, and a battery with charger for the chassis
  • Body is painted with decals applied and the RC system is pre-installed, so you can drive it straight out of the box
  • Newly designed RWD chassis is optimized for drift driving and is equipped with a steering and throttle gyro that makes drift control easy for anyone to enjoy
  • Plastic drift tires are included as standard and provide the optimal balance of drift slide and control
  • Includes newly designed KRG-331D receiver with built-in gyro and KS4072-06W servo
  • Variable wheelbase design allows most existing FAZER series bodies to be mounted
  • Battery holder can accommodate different size battery packs so most standard battery packs for R/C cars can be mounted
  • Wide range of optional parts are available for tuning and customization
drift-spec RWD chassis design features pre-installed RC system
Drift-Spec Chassis

Completely new drift-spec RWD chassis design features pre-installed RC system and receiver with built-in gyro. Suspension and motor mount are specifically designed for drift performance.

immaculately reproduced AE86 Sprinter Trueno
AE86 Sprinter Trueno

Toyota’s AE86 Sprinter Trueno is still popular today, nearly forty years after its launch almost 40 years ago in 1983. Kyosho has immaculately reproduced this ultra-scale body with molded plastic front and rear bumpers and also the AE86’s signature retractable headlights that can be (manually) open and closed.

Long-span front double wishbone suspension
Suspension

Long-span front double wishbone suspension provides plenty of steering angle with adjustable caster, roll center, and other geometry.

Motor is mounted high up on the chassis
Motor Position

High mount position of the motor induces moderate roll characteristics. User-friendly G22 brushed motor is included as standard with a gear cover to prevent dirt etc. from interfering with the drive train.

Gear ratio can be changed using the elongated hole in the motor mount
Motor Mount

Motor mount eliminates need for tricky gear backlash (mesh) adjustment. Gear ratio can be changed using the elongated hole to fit Kyosho 48P 16-37T pinion gears.

KS4072-06W servo is included
Drift Servo

New KS4072-06W servo delivers ideal steering characteristics for drift driving and works in combination with newly developed gyro unit that produces optimal counter-steer control.

KRG-331D receiver is included
KRG-331D Receiver

Equipped with a newly developed KRG-331D receiver incorporating built-in gyro unit optimized for drift driving. The gyro moderates both steering and throttle (speed control), and the gain (sensitivity) of each can be adjusted with a dial.

Rear mounted ESC is included
Electronic Speed Control

The ESC (Electronic Speed Controller) is mounted at the rear of the car to optimize weight distribution for drifting. The ESC is fixed in a special tray that can be removed with a single screw for easy maintenance.

The resin main chassis is split into front and rear sections
Main Chassis

The resin main chassis is split into front and rear sections, and the connection points can be changed to adjust the wheelbase to suit the body being mounted.

concealed body mounts mean the fixing posts and pins do not protrude externally
Body Mounts

Newly designed concealed body mounts mean the fixing posts and pins do not protrude externally, allowing a more realistic appearance of the exquisite ultra-scale body.

Wheel hubs are decorated with dummy brake calipers and discs
Wheels & Tires

Wheel hubs are decorated with dummy brake calipers and discs, dramatically elevating the scale appearance. The rear drive unit uses a spool (rigid) axle without a differential function to support smooth drifting.

Optional parts are available for the LED lights
Optional Parts

The optional Micro Servo (ON-MS18) and LED Light Unit (97054-4HR) and Supercharger Set can be installed.

Product Specs

Ball Bearings
Full Ball Bearings
Battery
Sold Separately
Body
Pre-Painted Polycarbonate
Charger
Sold Separately
Chassis
Plastic Chassis
Completion Level
Ready-To-Run
Differential
Gear Diff
Drive Type
Forward/Brake/Reverse
Drivetrain
2WD
Front Track
6.77" (172mm)
Gear Ratio
9.1:1
Manufacturer #
34501T1
Motor Type
Brushed
Power Type
Electric
Product Height
5.27" (134 mm)
Product Length
18.18" (462 mm)
Product Weight
51.14 oz (1450g)
Product Width
7.67" (195 mm)
Radio
Included
Rear Track
6.69" (170mm)
Receiver
Included
Scale
1/10
Servos
Included
Shock Type
Friction Shocks
Speed Control
Included
Suspension
Independent Suspension
Vehicle Size
Standard
Vehicle Type
On-Road
Wheelbase
10.23" (260 mm)
An all new performance based drift platform with a newly designed electronics, making the FAZER D2 the new standard for radio control drift.

Product Details

icon-box
In The Box
  • (1) 1/10 Toyota Sprinter Trueno AE86 Fazer D2 2WD Drift Car RTR
icon-how-to
Needed to Complete
  • (4) AA Batteries for Transmitter
  • (1) 7.2V - 7.4V Battery
  • (1) Battery Charger
1/10 Toyota Sprinter Trueno AE86 Fazer D2 2WD Drift Car RTR